Virtual production · built to orderAn LED volume, built on your stage.
We design, build and run an LED volume on your stage or location, calibrated to your cameras and lenses.
An engineer replies within two working days.Panels picked for the shot, specs you can check.
Every panel we supply is checked before it goes on set: no dead pixels, anti-reflective surface. Closer camera? We spec a finer pitch, such as AOTO DL1.9 at 1.95 mm.
Shots that work better on LED.
LED isn’t right for every scene. If a scene is cheaper or better on location or on a green screen, we tell you before you book.
Choose the panels and the shape of the wall.
Pick the panels, a shape and a size and send it over. We’ll reply with a design and a quote for your shots.
The longer you shoot, the less each day costs.
Every volume is designed for one production, so there is no price list. Four typical jobs and what we would build for them.
Same pitch on paper, different picture on camera.
Plenty of rental walls are 2.8–2.9 mm. On camera the difference comes from scan, refresh rate, grey scale and processing. Pick a parameter and switch between a typical budget wall and the panel we used on Ride or Die.
Illustration. The artefacts are simulated, not filmed.
| Spec | Typical budget wall, from public datasheets | ROE BP2V2 as used on Ride or Die |
|---|---|---|
| Pixel pitch | 2.9 mm (often 2.976 mm) | 2.84 mm |
| Scan ratio | 1/16, some 1/32 | Confirmed per project |
| Refresh rate | 3,840 Hz | 7,680 Hz |
| Brightness | 800–1,200 nits | 1,500 nits, calibrated |
| Grey scale | 14-bit | 16-bit |
| Processing | Basic sending and receiving cards, set up for live events | Confirmed per project, locked to the camera’s sync |
| Calibration | Factory calibration, panels often from mixed batches | Calibrated on site to your camera |
Budget column: typical values from public datasheets of entry-level 2.9 mm rental panels, not our own measurement. Products differ, so send us the quote you have and we’ll go through it with you line by line. ROE values from ROE Visual’s product page.
Content made for the wall, built in Unreal.
Our art department, led by Klára Obročníková, designs the environments, plates and graphics for your volume and tests them on the wall with your camera before the first take.
Real-time Unreal environments for LED volumes: exteriors, interiors, driving and train runs. Built to your shot list and checked through your camera before the shoot.
Most of the build happens before the truck leaves.
Shoots we’ve worked on
Each project with the part we actually did. Open one for photos and the result.




